Hobart/Magic Eye Installation: Difference between revisions
< Hobart
Created page with "Installation of Hobart laser end stop (or Magic Eye) is an electronic interrupted cut-off device, electric laser based end stop for rack conveyor dishwashers. == Parts Required ==" |
No edit summary |
||
| Line 1: | Line 1: | ||
Installation of [[Hobart]] laser end stop (or Magic Eye) is an electronic interrupted cut-off device, electric laser based end stop for rack conveyor dishwashers. | Installation of [[Hobart]] laser end stop (or Magic Eye) is an electronic interrupted cut-off device, electric laser based end stop for rack conveyor dishwashers. | ||
== Tools Required == | |||
* Drill | |||
* 20mm Hole Saw for Metal | |||
* 6mm HSS drill-bits | |||
* Side Cutters | |||
* Wire Strips | |||
* Pozi 2 Screwdriver | |||
* Slotted Terminal Screwdriver | |||
== Parts Required == | == Parts Required == | ||
* Laser End stop kit | |||
== Time to Complete == | |||
For first time installation of the Magic Eye, it could take about 2 hours and 30 minutes, as you familiarise yourself with the product. With help from this guide, we expect that it can be completed in about 1 hour to 1 hour and 30 minutes. | |||
== Installation == | |||
Revision as of 14:49, 17 April 2025
Installation of Hobart laser end stop (or Magic Eye) is an electronic interrupted cut-off device, electric laser based end stop for rack conveyor dishwashers.
Tools Required
- Drill
- 20mm Hole Saw for Metal
- 6mm HSS drill-bits
- Side Cutters
- Wire Strips
- Pozi 2 Screwdriver
- Slotted Terminal Screwdriver
Parts Required
- Laser End stop kit
Time to Complete
For first time installation of the Magic Eye, it could take about 2 hours and 30 minutes, as you familiarise yourself with the product. With help from this guide, we expect that it can be completed in about 1 hour to 1 hour and 30 minutes.